電導率探頭191145
非直接接觸式的不銹鋼外殼感應器（191145 PEEK感應器）測量溶液中的導電率.
可選擇四個不同導電率范圍感應器使之適用于不同領域。可選擇的測量單位有：μS/cm , mS/cm , ppm 及濃度的百分比。
非直接接觸式環形感應器技術避免玷污及校準的問題易于直接接觸式感應器。測量導電率非常可靠，感應器免除如直接接觸式感應器會受薄涂層的形成影響測量及還可測量寬范圍的導電率。
PEEKTM電導率探頭（191145 ）在物理強度、耐高溫及抗化學腐蝕能力都很出色。
]]>
電導率電極191113
非直接接觸式的塑料外殼感應器（191113 CPVC 感應器）測量溶液中的導電率.
可選擇四個不同導電率范圍感應器使之適用于不同領域。可選擇的測量單位有：μS/cm , mS/cm , ppm 及濃度的百分比。
非直接接觸式環形感應器技術避免玷污及校準的問題易于直接接觸式感應器。測量導電率非常可靠，感應器免除如直接接觸式感應器會受薄涂層的形成影響測量及還可測量寬范圍的導電率。
]]>
The WEC/WDEC410 Series Single and Dual Input Electrodeless Conductivity Controllers measure conductivity of a solution via an encapsulated, non-contacting sensor to control replenishment pumps and alarms. They may be installed in a variety of very harsh chemical control applications, including oily cleaner baths, chromates, rinse tanks, fume scrubbers and other concentrated chemicals up to a conductivity of 1000 mS/cm.
Four conducivity ranges may be selected to configure the controller over a wide range of applications. Choice of measurement units is μS/cm, mS/cm, ppm and % concentration.? The non-contacting, toroidal sensor technology is immune to thin coatings and the contamination and calibration problems that direct contacting sensors are prone to.
Integrated datalogging is available to validate performance. A USB memory stick is all that’s needed to extract data and event logs that include conductivity measurements, temperature and relay status.? Download log files from the USB stick to a PC at your convenience.? It couldn’t be easier!
SUMMARY OF KEY BENEFITS
Dual Input Reduces Cost
WDEC can accept two electrodeless conductivity sensor inputs, allowing one controller to take the place of two, reducing cost and space requirements, and simplifying installation.
Versatility for a Broad Range of Applications
Choose PEEK sensors for higher temperature, more aggressive chemical applications, or CPVC sensors for lower temperature, less aggressive chemical applications.? Both are available for in-line or submersible applications.? On/Off and Time Proportional control modes are menu selectable.
Ideal for Harsh Environments
The rugged, NEMA 4X enclosure, combined with Walchem’s electrodeless conductivity sensors, provides a waterproof system with no metallic parts exposed to wet or corrosive environments.
Built-in Safety Features
Programmable output limit timers prevent run-away chemical addition. Digital Interlock Input may be used from a flow switch or level input to prevent chemical addition based on a stagnant sample, or control of an empty tank. The alarm relay notifies plant personnel of alarm conditions as soon as they occur.
Simple, Integrated Data Collection
Download stored data from the controller to a USB stick with the press of a button. Use the data to simply and easily validate system performance, document compliance, and reduce liability. The data and event logs show conductivity and temperature values, as well as accumulated chemical feed and alarm relay activation times.
]]>
供應禾威WALCHEM WEC410電導率控制器 鹽酸控制器 191113電導率電極
深圳市奔藍科技有限公司一級代理美國禾威Walchem全系列水處理自動添加藥水控制器！
導電率自動添加藥水控制器（WEC410-5NPN? WDEC410）Electrodeless Conductivity Controllers
美國WALCHEM? WEC系列控制器能透過非直接接觸式的塑料外殼感應器（191113 CPVC 感應器）測量溶液中的導電率，從而控制添加泵或及警報器。一臺可控制一個或兩個溶液缸，可節省成本。控制器可適應于大多數非常惡劣化學品控制的應用，包括有：油性清潔劑缸、鉻酸鹽、清洗缸、濃煙洗滌器及其它濃縮化學品高至1000mS/cm的導電率。
可選擇四個不同導電率范圍感應器使之適用于不同領域。可選擇的測量單位有：μS/cm , mS/cm , ppm 及濃度的百分比。
?非直接接觸式環形感應器技術避免玷污及校準的問題易于直接接觸式感應器。測量導電率非常可靠，感應器免除如直接接觸式感應器會受薄涂層的形成影響測量及還可測量寬范圍的導電率。PEEKTM感應器（191145 ）在物理強度、耐高溫及抗化學腐蝕能力都很出色。
?美國Walchem禾威系列另有:
鍍銅/蝕銅自動添加藥水控制器（WCU410 ）
化學鎳/鍍鎳自動添加藥水控制器（WNI410 ）
pH/ORP自動添加藥水控制器（W-130/230? WPH410 /420? WDP410/420/440）
冷卻塔控制器（WCT400/410 ?WECT400/410 ?WDT400/410 ?WEDT410）
鍋爐控制器（WBL300/310 ?WBL400/410? WDB400）
冷凝控制器（WCM300 ?WCM400 ?WDCM400）
凈化/消毒控制器（WDIS 310? WDIS410）
Web Master ONE在線分析過程控制器
十多年來，深圳奔藍科技一直服務于PCB 廠商、五金電鍍、連接器、LCD、科研機構、高校、質量檢測中心、半導體、微電子、光電子、光通訊等領域。我們提供高質量的產品和最優質的服務都得到客戶最高的獎勵，在未來,我們將繼續履行客戶的期望、要求和需要。
]]>